Tridos Design

This modification removes the stock hopup arm / slider mechanism and replaces it with a thumbscrew that pushes down from the top. You can make insanely precise adjustments this way and tune your shooting trajectory to perfection.

Compatibility
TDC 2.

THE RIGHT WAY TO LOAD PISTOL MAGS.
✔ No more broken nails.
✔ No need to take off your gloves.

Works with most pistols
Unicorn adapter ships with 2 different tips - regular and hi-capa. This ensures compatibility with almost any gas pistol magazine

Finally, an external adjuster for the Action Army VSR10 chamber! It replaces the original hop arm with a nub system and click / smooth adjuster mechanism. You can make insanely precise adjustments this way and tune your shooting trajectory to perfection.

⚠ MAKE SURE TO SELECT THE CORRECT SIZE STABILIZER

⚠ Not compatible with Full Thrust inner barrels

→ Apply drop silicone oil to o-rings for easier installation

Our universal inner barrel stabilizer range is made to be compatible with almost any ou

Finally, an external adjuster for the Action Army VSR10 chamber! It replaces the original hop arm with a nub system and click / smooth adjuster mechanism. You can make insanely precise adjustments this way and tune your shooting trajectory to perfection.

This modification removes the stock hopup arm / slider mechanism and replaces it with a thumbscrew that pushes down from the top. You can make insanely precise adjustments this way and tune your shooting trajectory to perfection.

Compatibility
TDC 2.

This modification removes the stock hopup arm / slider mechanism and replaces it with a thumbscrew that pushes down from the top. You can make insanely precise adjustments this way and tune your shooting trajectory to perfection.

Compatibility
TDC 2.

This is an upgraded lid for ODIN innovations M12 sidewinder speedloader made to make filling the speedloader and unloading the mags much easier with the silicone inlay installed.

This lid has a feature that opens silicone flaps on the fill port allowin

→ SWITCH FIRE MODE EASILY
→ EXTREMELY LOW PROFILE
→ 180 DEGREE ROTATION
This Mini External Fire Selector switch is made for stock AAP-01 blow back unit with extremely low profile in mind. The top side has small engravings that indicate whether single f

→ HIGH STRENGTH Q460 STEEL
→ JIG FOR EASY INSTALLATION
→ BLACK OXIDE COATING
This is a must have upgrade for every AAP-01 as it's only a matter of time when the stock hammer will fail. Our steel hammer is more affordable and just as strong.

While ha

For SSG10 owners who have removed their safety switch and don't like the hole waiting to be filled with sand, dust and water. We have three versions tailored to either A1, A2 or A3 stocks as they are quite different.

⚠ Original safety switch screw requ

This is an upgrade part for standard SSG10 / VSR10 hopup chamber to avoid double-feeding on stronger magazines like Action Army VSR10 50rd or when using high capacity M4 midcap magazines using our M4 Adapter.

Made out of CNC machined aluminum. The spri

These are upgraded SSX23 followers for Novritsch / ASG magazines which feature:

4-5 additional BB capacity
empty mag trigger locking
larger pull tab for easier loading
These will fit inside Tokyo Marui mags but trigger lock might not work. Comes wit

⚠ CHECK FOR CHAMBER COMPATIBILITY BELOW BEFORE BUYING!

⚠ TDC 2.0 INSTALLATION REQUIRES DRILLING ADDITIONAL HOLE

This TDC 2.0 modification removes the stock hopup arm mechanism and replaces it with a thumbscrew that pushes down from the top. You can

This thumbscrew is made in collaboration with Project Airsoft. It replaces the original screw on your pistol's TDC cover and is fully compatible with:

Novritsch TDC cover for SSX23 and SSX303
Hadron Design's TDC cover for MK23
Most other TDC covers w

This modification removes the stock hopup arm / slider mechanism and replaces it with a thumbscrew that pushes down from the top. You can make insanely precise adjustments this way and tune your shooting trajectory to perfection.

Compatibility
TDC 2.

→ ADJUSTABLE TRIGGER PULL
→ IMPROVED FINGER GRIP
→ SNAPPIER SHOTS
⚠ INSTALLATION REQUIRES PARTIAL DISASSEMBLY OF INTERNALS

If you're looking to upgrade your AAP-01, this should be your first upgrade. It makes the gun feel instantly more snappy and r

This is an improved hopup arm design optimized for SSX23 (it also works just fine on TM MK23). It's made out of solid CNC machined aluminum and is known to increase consistency of the SSX23 hopup chamber due to having no flex and larger concave contact a

⚠ CHECK FOR CHAMBER COMPATIBILITY BELOW BEFORE BUYING!

⚠ TDC 2.0 INSTALLATION REQUIRES DRILLING ADDITIONAL HOLE

This TDC 2.0 modification removes the stock hopup arm mechanism and replaces it with a thumbscrew that pushes down from the top. You can

This TDC hopup adjustment tool made in collaboration with Project Airsoft. It allows for easy adjustment for any SSX23 / MK23 TDC cover.

This tool can be attached to the threads located on trigger guard (originally designed for LAM unit) when not in us

This was designed for SSG24 but it also works with SSG96 and Steyr Scout magazines.

Permanently attached
No more gluing or hacking. Attaches directly to speedloader and held in place with a screw. Compatible with most speedloaders on the market.

Su

This wrench is made out of anodized aluminum and has 6 different width settings for the 2.5mm size stainless steel pins. This makes it compatible with pretty much any cylinder head out there!

This cylinder nozzle wrench will fit any cylinder head with:

Are you also tired of having BB's spilled everywhere when reloading your mags with ODIN M12 speedloader? That's why we made an improved nozzle that solves this.
Drop-in replacement for original nozzle
BB retention mechanism to avoid spilling with replac

This drill jig is made to make it easy to drill a new hole in older SSX23 magazines to make them compatible with our Upgraded SSX23 Mag Followers.

Additional things you will need for this modification:

Handheld drill / drill press
Bench vice or jaw