Springs & Spring Guides

The Silverback Airsoft M160 APS 13mm Type Spring for SRS Pull Bolt Version, 13 mm outside diameter, 11 mm inside. The APS large type is stuiable for APS-2, APS-T96, APS-SR2, M24 versions.

Items included:
1x Silverback Airsoft M140 APS 13mm Type Spring

9 mm Sleeve for my 7.5mm VSR spring guide. Made out of Nylon. Superstrong. For use with 13mm springs.

Guarder AEG Tune Up Spring (SP100)

•  Color : Black
•  Material: Oil Quenched/Tempered Si-Cr Alloy Steel Wire
•  Suitable for : MARUI All AEG ( exclude PSG-1 )
•  Length : About 170 mm
•  Weight: 20g

TTI VSR10 One Piece 7mm Spring Guide. An upgraded steel spring guide for VSR10 based rifles, which is 7mm ID to use standard 11mm OD springs.

This version has been made for VSR rifles (and clones) which use a 7mm Inner and 11mm Outer Diameter Spring.

Guarder AEG Tune Up Spring (SP110)

•  Color : Black
•  Material: Oil Quenched/Tempered Si-Cr Alloy Steel Wire
•  Suitable for : MARUI All AEG ( exclude PSG-1 )
•  Length : About 170 mm
•  Weight: 20g

One piece stainless steel spring guide for VSR.



Key specs :

- 9 mm shaft diameter

- FPS rings compatible

- For 13 mm springs

- Tested with all Rapax springs

- Smooth surface

- Wide diameter of rear part 12.7 mm helps center a pi

APS 13 mm, 100 Newtons spring



This spring is following the “APS 13 mm standard” (for 9 mm outside diameter spring guide). It will fit any rifle compatible with this standard, including all SRS (except the discontinued “push bolt” mechanism) and al

The Silverback Airsoft M130 APS 13mm Type Spring for SRS Pull Bolt Version, 13 mm outside diameter, 11 mm inside. The APS large type is stuiable for APS-2, APS-T96, APS-SR2, M24 versions.

Items included:
1x Silverback Airsoft M130 APS 13mm Type Spring

One piece stainless steel spring guide for VSR.

Works best with my SCW 90° VSR piston.



Bit longer than standard spring guides - may not work with all brands of pistons ( can be shortened )



Key specs :

- 7.5 mm shaft diameter

- Abl

The Silverback Airsoft M120 APS 13mm Type Spring for SRS Pull Bolt Version, 13 mm outside diameter, 11 mm inside. The APS large type is suitable for APS-2, APS-T96, APS-SR2, M24 versions.

Items included:
1x Silverback Airsoft M140 APS 13mm Type Spring

Guarder AEG Tune Up Spring (SP90)

•  Color : Black
•  Material: Oil Quenched/Tempered Si-Cr Alloy Steel Wire
•  Suitable for : MARUI All AEG ( exclude PSG-1 )
•  Length : About 170 mm
•  Weight: 20g

The Silverback Airsoft M90 APS 13mm Type Spring for SRS Pull Bolt Version, 13 mm outside diameter, 11 mm inside. The APS large type is suitable for APS-2, APS-T96, APS-SR2, M24 versions.

Items included:
1x Silverback Airsoft M140 APS 13mm Type Spring

Action Army Tokyo Marui L96 Spring Guide.

Made of stainless steel and include a bearing base