Viper Red Dot 6 MOA

Vortex Viper Red Dot. The Viper Red Dot's super-low mounting height makes it the perfect solution for handguns with cutout slides. The Viper gives shooters the simplicity and speed advantage of a dot sight, while co-witnessing with suppressor height iron sights. The trade off? Nothing. The 6 MOA dot diameter gets shooters on target fast.

Fully multi-coated, ultra-clear lens offers a wide, unobstructed field of view. The left-side up/down power and illumination controls are easy to access and manipulate. Recessed 1 MOA windage and elevation adjustments are super clean, protected from incidental contact, and always at the ready. It runs on a CR 2032 battery.

Note: The Viper comes with a Weaver / Picatinny mount—weighs 2.1 ounces with mount.
Includes

Weaver / Picatinny Mount
T-10 Torx Wrench
CR 2032 Battery
Lens Cloth
Flathead Wrench
Protective Cover
OPTICAL FEATURES

Fully Multi-Coated
Multiple anti-reflective coatings on all air-to-glass surfaces increase light transmission.

Parallax Free
All red dot and holographic sights will exhibit some small amount of parallax. Matching current industry practice, this small amount would be considered “parallax free” and will make a negligible difference in the Viper’s performance.

CONSTRUCTION FEATURES

Single-Piece Chassis
Compact and lightweight.

Waterproof
O-ring seals prevent moisture, dust and debris from penetrating for reliable performance in all environments.

Shockproof
Rugged construction withstands recoil and impact.

Hard Anodized Finish
Highly durable low-glare matte finish.

ArmorTek
Ultra-hard, scratch-resistant coating protects exterior lenses from scratches, oil and dirt.

CONVENIENCE FEATURES

Unlimited Eye Relief
Non-critical eye relief for rapid target aquisition.

Battery Life
14-hour auto-shutdown feature maximizes battery life. Up to 150 hours of use at highest setting. Use at the more common lower settings can allow up to 30,000 hours.

COMPATIBILITY FEATURES

Lug/Screw Footprint: Compatible with Burris Fastfire/Docter
If mounting to a handgun with slide cutout:
Slide cutout type
Glock MOS (9mm or .40) - (SHIM-BDS) - Use plate #1.
Glock MOS (.45 or 10mm) (SHIM-BDS) - Use plate #5.
M&P CORE- Plate 5 and the “C” screws
FNX-45- (SHIM-BDS). Uses the non-Trijicon plate.
Rear sight dovetail mounts:
Sig P220 series- Mount available at EGWguns.com
1911s- Mounts available at EGWguns.com
Springfield XD/XDM: Mounts available at Springer Precison.